Description
The Series 1000 MK4 range of Conventional Fire Alarm Control Panels is designed to conform to BS 5839 Part 4. Available in a standard range from 2 to 36 zones, each with internal power supply and space for Sealed Lead Acid Batteries. The internal power supply can be supplied from 3 ratings: 1.25 Amp, 3 Amp, or 5 Amp.
The panels are housed in an attractive metal enclosure with all user controls and indications located on the front fascia, together with clear operating instructions. A bezel can be fitted to the back box to enable the control panel to be flush mounted. Special colours or non-standard finishes are available to special order. A glazed outer door version is also available.
The Series 1000 MK4 control panels allow for continued operation of the field devices upon removal of a plug-in device from the detection line. This is achieved with an external active end-of-line device (these need to be ordered separately).
The panels are suitable for connection to pre-BS 5839 type systems, including 3 wire. The zone electronics can be changed to “short circuit for fire condition,” thus removing the requirement to fit series resistors in existing call points. Ample cable entries are provided at the top of the enclosure, and removable chassis plates are provided on the larger panels. The electronics are based upon a system of “motherboards” with plug-in modules allowing customising of the panel to the site requirements.
